Dongfeng 20,000L Water Sprinkler Truck: Specifications and Applications
مشاركة
Watering roads and managing dust require a truck configuration that matches the working environment. The Dongfeng 20,000L water sprinkler truck combines a large water tank with front sprinkling equipment and an adjustable rear water cannon. Here is a practical overview of the configuration shown in the supplied specification sheet.
20,000-Liter Water Tank
The specified tank capacity is 20,000 liters, with Q235 carbon steel listed as the tank material. When planning a working route, operators should consider water availability, refill locations, and the required application rate. Actual operating time between refills depends on water flow and site conditions.
Dongfeng Chassis and 260 HP Engine
This configuration uses a Dongfeng chassis with left-hand drive and a two-person cab. The YC6A260-33 engine is rated at 191 kW / 260 HP, and the specification sheet lists a Euro 3 emission standard. The transmission model is 9JS119TA.
Overall vehicle dimensions are listed as 10,250 × 2,550 × 3,150 mm, with a 4,350 + 1,350 mm wheelbase. These dimensions are useful when assessing site access, parking space, and route suitability.
Front Sprinkling and Rear Water Cannon
The front sprinkling width is listed as 15–30 meters. At the rear platform, the water cannon is described as adjustable through 360 degrees. The sheet also lists a dust-control figure of 25–30, but does not clearly state its unit or test conditions, so this figure should be clarified before it is used as a guaranteed operating range.
Spray coverage and performance depend on the pump configuration, nozzle settings, operating pressure, wind, and other site conditions. Confirm the required working performance when selecting the final configuration.
Key Technical Specifications
| Item | Listed Specification |
|---|---|
| Chassis brand | Dongfeng |
| Drive position | Left-hand drive |
| Overall dimensions | 10,250 × 2,550 × 3,150 mm |
| Gross vehicle weight | 25 t |
| Engine model | YC6A260-33 |
| Engine power | 191 kW / 260 HP |
| Emission standard | Euro 3 |
| Wheelbase | 4,350 + 1,350 mm |
| Cab capacity | 2 persons |
| Transmission | 9JS119TA |
| Front / rear axle ratings | 6.5 t / 11.5 t, as listed |
| Tire specification | 11.00R20 18PR |
| Water tank capacity | 20,000 L |
| Tank material | Q235 carbon steel |
| Front sprinkling width | 15–30 m |
| Rear water cannon adjustment | 360 degrees |
Planning for Road Watering and Dust Control
Potential applications include road watering, construction-site dust suppression, and industrial-yard spraying. The most suitable setup depends on route length, surface conditions, water demand, and the required spraying pattern.
The supplied sheet lists both a 25 t gross vehicle weight and a 20,000 L tank. Tank volume alone does not establish the permitted water payload. Confirm the actual chassis configuration, unladen weight, axle limits, and allowable loaded weight before specifying a full-tank operating load.
Discuss Your Required Configuration
Contact Shenbai Special Truck Manufacturer to discuss your working environment, required tank capacity, and spraying equipment. Share your destination and application so the proposed chassis, engine specification, and water system can be reviewed for your project.
Need a reliable truck crane supplier?
Shenbai Group is a factory-direct manufacturer of truck-mounted cranes, aerial work platforms and special-purpose vehicles, exporting to 100+ countries. Tell us your lifting capacity and chassis requirement, and our engineers will propose a configuration within 24 hours.
